Evenflo Company, Inc. (Evenflo) is recalling certain Evolve 3-in-1 Combination Booster seats, model number 34411700 manufactured from February 26, 2015 through February 9, 2016 and model number 34411741 manufactured May 27, 2015 to February 9, 2016.
Evenflo Company, Inc. (Evenflo) is recalling certain Evolve 3-in-1 Combination Booster Seats, model number 34411700 manufactured February 26, 2015, to February 9, 2016 and model number 34411741 manufactured May 27, 2015, to February 9, 2016. The affected seats have a button for adjusting the harness tightness. The child in the seat can access this button and loosen the harness without the caregiver’s knowledge. If the child is able to loosen the harness, they may not be properly secured in the event of a crash, increasing their risk of injury.
The Harness Adjustment Button is located under a plastic shield between the occupants legs.
This voluntary recall impacts the use of the car seat in the harnessed mode only.
Evolve 3-in-1 Combination Booster Seat
NHTSA Campaign Number: 16C007
Car Seats Affected: The recall includes the following:
|Evolve 3-in-One Model Numbers||Affected Date Range|
|34411700||2/26/2015 to 2/9/2016|
|34411741||5/27/2015 to 2/9/2016|
If the child is ableto loosen the internal harness, the child may not be properly secured in the event of a crash, increasing the risk of injury.
Evenflo is providing, at no charge, a remedy kit that will prevent child access and activation of the harness adjustment button. The remedy kit includes a replacement harness adjustment button assembly and installation instructions. To determine if your child’s seat is included in this recall and to order a remedy kit, please visit www.evolve.evenflo.com or call our ParentLink Consumer Resource Center at 1-800-233-5921 (US)/ 1-800-265-0749 (Canada). Please do not return your child’s seat to retailers.
- If your child is not accessing and activating the harness adjustment button, then the Evolve may be used safely in harnessed mode until the remedy kit is installed.
- If your child is accessing the harness adjustment button in harnessed mode, then the seat should not be used until you install the remedy kit. Please remember that if your child meets the height and weight requirements for the belt-positioning modes (stages 2 and 3), then the seat may be used safely in these modes.
Evenflo will notify registered owners and provide a remedy kit with a replacement harness adjustment button, free of charge. The remedy kit includes a push-style harness adjustment system to replace the existing pull-style button. This change effectively eliminates the child’s ability to access and activate the harness adjustment button while in the car seat.
Evenflo is conducting this voluntary recall in coordination with the U.S National Highway Traffic Safety Administration (“NHTSA”).